Ripplefold Single /Double Nexgen Curtain Track Sets

NEXR-72-60-WH
  • $ 174.00


Shop our Ripplefold panels

See our ripplefold instruction page to see how we've made ripplefold easy and learn more.

Snap tape that is sewn at the top of the drapery is sold separately.

Complete assembled wall mount ripplefold track set using our Nexgen track.  Can easily be cut to size with a hack saw, or if you leave a dimension(s), we will custom make it.

Heavy duty aluminum track in white, bronze or black. 1" tall and 1" deep with decorative square end caps. Double sets have Nexgen track on front and Euro track on back. If you want a different fullness on each track, let us know in the special instruction box in the cart.

Track is rated at 4 lbs per foot; for example, a 10 ft. track will hold a maximum of 40 lbs.

If no dimension is given, you will receive either a 72", 90", 120", 144", 180" or 216" set, depending on the size selected. The 120", 144" and 180" set will come in 2 pieces with a splice in the center. 216" set will come in 3 pieces with 2 splices. 

If you request your set cut to a certain dimension, the chart in the ripplefold instructions will be used to determine the number of carriers.

The 72" set includes track, 2) end caps, 3) wall brackets, ripplefold carriers (quantity based on fullness chosen), 2) 36" batons for wall mount.

The 90" set includes track, 2) end caps, 3) wall brackets, ripplefold carriers (quantity based on fullness chosen), 2) 36" batons for wall mount.

The 120" set includes track, 2) end caps, 5) wall brackets, ripplefold carriers (quantity based on fullness chosen), 1) splice, 2) 36" batons for wall mount.

The 144" set includes track, 2) end caps, 5) wall brackets, ripplefold carriers (quantity based on fullness chosen), 1) splice, 2) 36" batons for wall mount.

The 180" set includes track, 2) end caps, 7) wall brackets, ripplefold carriers (quantity based on fullness chosen), 1) splice, 2) 36" batons for wall mount.

The 216" set includes track, 2) end caps, 7) wall brackets, ripplefold carriers (quantity based on fullness chosen), 2) splices, 2) 36" batons for wall mount.

Customer Reviews

Based on 1 review
0%
(0)
100%
(1)
0%
(0)
0%
(0)
0%
(0)
F
First time customer
Quality Hardware

The rod and brackets are very strong and will not bend, like cheap rod wall brackets. On a 6’+ length I did have a few of the snap loop connector pieces that were slightly loose (aka too big for the female snap) and the wiggle a bit, but must be something from the plastic manufacturer. I would suggest sending a few extra of those pieces and a few extra female loop connectors in case one breaks. Also, the wand to open the drapes is beige and the track is pure white. Lastly, I would wrap the wall brackets without the screw separately in bubble wrap, as my wall brackets had slight scratches on them from the screws rubbing on them from shipping. Also, remind people know the two end caps will add a half inch on either side of the rod. I did not know that and I have a very tight fit now. Thanks.


We Also Recommend